Comparasuisse

Technical

Using your own router: which Swiss providers allow it

Swisscom, Wingo, Init7 Fiber7 and iWay officially accept your own router. The exact settings, and the restrictions to know before you buy.

Published on 18.11.2026

Replacing your provider's box with a Fritz!Box, a UniFi or a pfSense is not just a tinkerer's whim: it is often the only way to get a real firewall, an outbound VPN, local DNS or serious control over your home network. In Switzerland, not every provider allows it, and not all of those that do document it.

Who officially allows it

Swisscom — yes, and it is publicly documented. You can replace the Internet-Box with your own router, or put yours behind it on a separate subnet.

Wingo — yes, on the same infrastructure as Swisscom, with the same settings.

Init7 — yes, on the Fiber7 offer, which explicitly champions free choice of router.

iWay — yes, on all four tiers of its offer, from 20 Mbit/s to 10 Gbit/s.

The settings, at Swisscom and Wingo

Three parameters are enough, and they are officially documented by the provider.

DHCP option 60 with the value 100008,0001. This is the identifier the network expects in order to recognise legitimate customer equipment. Without it, the router doesn't get an address.

VLAN ID 10 on the WAN port, for a fibre connection.

IGMP Multicast Proxy, to enable if you want to keep blue TV. The TV stream is multicast: a router that doesn't relay it leaves the TV box with no picture.

These three settings exist on almost all serious consumer routers and on all professional equipment.

The three restrictions to know

10 Gbit/s fibre on XGS-PON. At Swisscom, Wingo and on blue Internet L, only Swisscom-certified routers and SFP modules are supported on this technology. Your hardware can be excellent and still not work. This is the most costly restriction, because it affects precisely the high-end plans that technical users choose.

Init7 Easy7. This offer requires exclusive use of the Init7 modem — a preconfigured FRITZ!Box. It is a deliberate turnkey positioning. To use your own hardware at Init7, you need to choose Fiber7, not Easy7. Two offers from the same provider, two opposite policies.

Other providers. For Sunrise, Salt, yallo and regional cable operators such as Netplus or Quickline, the policy varies and is not always published. Silence is not permission: check directly with the provider before buying hardware.

The in-between set-up, when replacement isn't possible

If your provider doesn't allow replacement, there is still a widely used solution: keep the provider's box and put your router behind it, on a separate subnet.

You lose the direct public address and add a layer of address translation, which complicates hosting services accessible from outside. But you gain the firewall, the VPN, local DNS and network segmentation — most of what most people are looking for.

Remember to turn off the provider box's wifi to avoid two competing networks on the same channels.

Why it matters more than it seems

A provider's box is updated by the provider, on its schedule, with the features it has chosen. Your own router is updated when you decide, and does what you ask of it.

In practice, this opens up DNS filtering for the whole household, a permanent outbound VPN, a truly isolated guest network, segmentation of connected devices, parental controls that don't depend on a third-party service, and keeping your configuration when you change provider.

That last point is the most underestimated: your network follows you, instead of being rebuilt every time you change plan.

How to spot it in our comparison

Offers that accept your own router carry a dedicated badge in our internet comparison. It is a criterion providers rarely highlight — when they allow it, they don't sell it; when they forbid it, they don't say so either.


Frequently asked questions

Do you lose the warranty or support by using your own router? The connection remains guaranteed, but the provider's support generally stops at its own box. In the event of a fault, you will often be asked to reconnect the original equipment so they can diagnose the problem.

Does TV work with your own router? Yes at Swisscom and Wingo, provided you enable the IGMP multicast proxy. On cable networks, it varies more — check beforehand.

Which router should I choose? The brand doesn't matter; what counts is support for DHCP option 60, VLAN tagging and IGMP proxy. Fritz!Box, UniFi, MikroTik, OPNsense and pfSense handle all three. For 10 Gbit/s fibre at Swisscom, check certification before buying.