Fibre to the home, fibre to the street, cable or copper: what the acronyms mean, which speeds are possible and how to find out what reaches your address.
"Fibre", "fibre to the neighbourhood", "cable", "Giga": internet offers take very different technical routes to reach you, and that route decides the speed you will actually get, whatever the price of the plan. Before comparing offers, you need to know which type of connection serves your address. Here is how to find your way.
The main types of connection
In Switzerland, the internet reaches homes over three kinds of network, which the Federal Office of Communications (OFCOM) distinguishes: optical fibre, the television cable (coaxial) and the copper telephone line.
Fibre to the home (FTTH). OFCOM defines it as the network that brings optical fibre to households and businesses. It is the most capable connection: Swisscom speaks of speeds in the gigabit range. At home you can recognise it by an optical wall socket, separate from the telephone socket.
Fibre to the building (FTTB). According to OFCOM, the fibre extends at least as far as the building; the last stretch, inside the building, uses the internal cabling.
Fibre to the street (FTTS). Swisscom describes fibre that runs to just in front of the buildings, with copper covering the rest of the way. Speed stated by Swisscom: up to 500 Mbit/s.
Fibre to the cabinet (FTTC). The fibre stops at a distribution point in the neighbourhood, and copper takes over to the home. Swisscom states up to 100 Mbit/s.
Cable (coaxial). This is the cable television network, used by many regional cable operators. OFCOM lists the DOCSIS 3 standard alongside fibre among the technologies for very high-speed networks.
Copper only (DSL). The traditional telephone line, to which OFCOM assigns the xDSL technologies. The further you are from the exchange or distribution point, the lower the speed.
The figures given are maximum download speeds stated by the operator. Your actual speed also depends on your plan, your router and your Wi-Fi.
Why it matters for your plan
Two practical consequences:
- the maximum speed depends on the connection, not on the offer. A "10 Gbit/s" plan is no use on an FTTS line limited to 500 Mbit/s: the operator will only offer you the plans available at your address anyway;
- the choice of operators also depends on the connection. A fibre or copper line often lets you choose between several providers, whereas the cable network is usually run by one cable operator and its partners. Our internet comparison lets you filter offers by connection type: fibre, cable, DSL or 5G wireless.
The connection also affects the true cost: activation fees, router or installation can vary with the technology. Our guide to the true cost of an internet plan explains these charges.
How to find out what reaches your home
1. The operators' address check. This is the most precise source. Every provider has a checker on its website: you enter your address and it shows the speeds and offers available. Swisscom points to its checker at swisscom.ch/checker. Run the test with several operators: the result differs from one network to another.
2. OFCOM's broadband atlas. This interactive map shows, for fibre, cable and copper, the speeds available, the connection types and the providers active in an area. Two limits: the data is published in grid squares of 250 by 250 metres, not by address, and operators take part voluntarily, so those that did not supply data do not appear.
3. The fibre map on opendata.swiss. OFCOM publishes there the share of buildings connected to fibre (at least as far as the building), per 250-metre grid square. The office says this representation is purely indicative, and that the actual situation should be checked with the providers.
4. At home. An optical wall socket indicates an FTTH connection, even if it is not yet activated. Your managing agent or landlord usually knows which networks serve the building.
Fibre is growing, copper is fading
The network is changing fast. Swisscom aimed for fibre coverage of 57% of households and businesses by the end of 2025, and 75 to 80% by the end of 2030, while gradually taking its copper network out of service, at first only where fibre is already available, according to the operator. Swisscom writes that after around 150 years, the era of the copper network is coming to an end.
For the few per cent of homes it considers uneconomic to connect, Swisscom plans to provide service by mobile network or satellite. The Federal Council also adopted a federal strategy for a very high capacity network on 28 June 2023.
And if your address remains poorly served, the universal service guarantees a minimum speed: our guide to universal service in Switzerland sets it out. For mobile coverage, as a complement or back-up, see our network coverage page.
Frequently asked questions
What is the difference between FTTH and FTTS? With FTTH, the fibre runs into the home, with speeds in the gigabit range according to Swisscom. With FTTS, it stops in front of the building and copper does the rest, with a stated speed of up to 500 Mbit/s.
How do I know if I have fibre? Run the address check on several operators' websites. An optical wall socket indicates an FTTH connection. OFCOM's broadband atlas gives an indication per area, not per address.
Is cable as fast as fibre? OFCOM classes cable (DOCSIS 3 standard), like fibre, among the technologies for very high-speed networks. The actual speed depends on the local network and the offer: compare the offers available at your address.
Will the copper network disappear? Swisscom is gradually taking its copper network out of service, starting where fibre is already available, and aims for 75 to 80% fibre coverage by the end of 2030.